Sliding Gates are the gates with self-supported construction and are backed by superior security standards. These are made available in fully pre-assembled finish and are made available using stable steel profiles with maximum opening of 12 meter widths. Further, for gates that open in opposite directions, widths of 24 meters can also be attained. Backed with self supporting construction, that advantage includes need of little foundation work, no door travel malfunctions because of ice, snow or heavy soiling as well as no side guide fitting.
These are also ideal choice for securing wide gateways that are also available in quality finish due to use of use of sturdy steel profiles with opening width of up to 12 m. Based on two systems working that work in opposite directions, the offered construction is also self-supporting and are perfectly aligned. Further, the pre-tensioning of gate leaf construction also assists in bringing reduction in risk of bowing with tensioning element also providing for height level of front edge to be corrected even after installation.
Rolling Shutters and Rolling Grilles are not only economical but are also reliable in terms of usage and come in simple construction with use of just few components. These shutters and rolling grilles are designed using different metals including steel, stainless steel or aluminum and find suitability for daily use time and again.
Further, its superior designing also ensures these shutters and rolling grilles require very less space above opening as this form into compact coil behind lintel with ensuring valuable hall space at sides/ceiling area. With construction above the regular standards, the use of full hard steel also support raising deflection resistance by factor of 3 as well as in enhancing resistance to bending by 10% that make these shutters and grilles highly resistant to damages while providing for complete stability under wind loads.
Double-Action Doors are available in precision construction finish and find suitability for use in buildings having normal forklift traffic. Providing functionality as double-action doors, we offer these in pre-assembled finish that provides for simple fitting. Further, the door size is also twice as wide; 500 mm higher than transported goods.
These also provide for flexible door solutions and come with construction using galvanized steel parts featuring frame profiles of 3 mm and 2.5 mm for different versions as well as Door leaf of soft, transparent PVC of approx. 7 mm thickness supported by additional plastic corner reinforcement that assists in providing necessary protection against tearing. These require manual operations where the closing force can be adjusted up to 50 Nm.
Sportshall Doors provides for smooth-running as well as maintenance-free usage with long-term functional reliability. Also offering for quiet operations even in areas of high frequency, these doors feature maintenance-free construction that allows for easy opening and closing. Some of the other advantages of these doors include tested door units and operator so as to provide for longer service life, door construction suitable for around 250,000 door cycles, low headroom requirements that make these ideal for tight spaces as well as use of galvanized, powder-coated door leaf in colors that can be made available on request. These can also be made available with wicket door and side door.
Fire Sliding Doors are designed to provide reliable building protection depending on fire load. These can be made available in single as well as double-leaf versions in compliance with demands of operation as well as risk usage for all desired areas. The presence of fire protection designs also come tested in compliance with DIN 4102 with quality standards continuously monitored.
As these doors are smoke-tight, these also provide for use in safe escape as well as rescue routes and also additionally tested as per DIN 18095. These can be used in areas that require fast passage of pedestrians as well as for smaller trolleys or hand trucks. For reasons of fire protection, these wicket/escape doors also come equipped with option of slide rail overhead door closers.
Industrial Sectional Doors are designed to open vertically and in creating greater space at front as well as behind door areas as door sections are parked flat under ceiling that is vertically above opening/in line with roof. These are made of steel/aluminum combination or in aluminum construction finish and as these compact design standards, the doors are able to stack vertically individual sections behind the lintel.
Further, small distance back also provides for advantage to halls with glass roofs, glass facades and dome lights. Coming in scratch resistant finish, these sectional doors are of wicket door type with threshold that is trip-free and helps in decreasing risk for persons passing through. Further, its flat stainless steel threshold and rounded edges also allow easy handling over tool trolleys.